Siemens wins order for HVDC link between Great Britain and France

  • ElecLink interconnector to increase the existing interconnection capacity between the two countries by 50 percent
  • Interconnector will foster energy exchanges, thus providing increased reliability and security to consumers throughout Europe
  • ElecLink is one of the European Commission’s projects of common interest

Siemens has been awarded an order to supply a link between the French and British power grids. The customer is ElecLink Limited, a wholly owned subsidiary of Groupe Eurotunnel SE. The “ElecLink” high-voltage direct-current (HVDC) link will enhance power supply reliability in both countries and promote the integration of renewable energy sources into the power grid. Siemens will supply the two HVDC converter stations at both sides of the DC power line, which will be routed as a DC cable through the Channel Tunnel. This cable is to be supplied by Prysmian and installed by Balfour Beatty. The volume of Siemens’ share of the order is around EUR 315 million. The link is scheduled to take up commercial operation early 2020. The foundation stone of the future converter station was laid on February 23, 2017, by Jesse Norman, Minister for Industry and Energy signalling the start of the construction work which, when complete, will supply enough electricity to power more than 1.65 million typical households per year.

Infographic - Siemens HVDC power bridge

“We are extremely pleased to drive the development of a high-performance, European interconnected power system. With this new interconnection we support our customer ElecLink to implement efficient market trading arrangements and the expanded integration of renewable energy sources”, stated Ralf Christian, CEO of the Siemens Energy Management Division. “Siemens has already commissioned multiple HVDC links like BritNed, connecting Great Britain and the European continent and is currently implementing further projects like NEMO and now ElecLink.”

Steven Moore, Chief Executive Officer of ElecLink said: “Today marks the culmination of years of hard work to make ElecLink a reality. I am delighted it can now proceed with world-class partners such as Siemens. The construction phase of the project will bring together the world’s best engineers and technologies to pursue the construction without interruption of the tunnel’s traffic, and when complete, it will play a key role by helping to meet the governments’ energy trilemma.”

The HVDC link between France and Great Britain has been designated as one of the European Commission’s projects of common interest to help create an integrated European Union energy market. As the cable goes through the Channel Tunnel there will be no subsea lay or burial in the Channel.

The scope of the order covers a 1000 MW converter system for a DC voltage of ±320 Kilovolt (kV). The two converter stations, one at Peuplingues in France, the other in Folkestone in the UK, will be linked by a 51 kilometer-long DC power cable. The scope of supply includes the overall system design and the supply, installation and commissioning of all components. The HVDC power modules and HVDC transformers will be manufactured at two Siemens factories in Nuremberg, Germany.

Both converter stations will be using HVDC Plus voltage-sourced converters in a modular multilevel converter arrangement (VSC-MMC) that convert AC to DC and DC back to AC on the other side of the link. In contrast to line-commutated converter technology, the HVDC Plus system works with power transistors that can also be switched off (IGBT), enabling the commutation processes in the power converter to run independently of the grid voltage. The very fast control and protective intervention capabilities of the power converters provides a high level of stability in the transmission system, which primarily serves to reduce grid faults and disturbances in the three-phase AC network. This significantly increases supply reliability for utility companies and power customers.

This press release, press pictures and further information is available at

For further information on Energy Management, please see

Siemens AG (Berlin and Munich) is a global technology powerhouse that has stood for engineering excellence, innovation, quality, reliability and internationality for more than 165 years. The company is active in more than 200 countries, focusing on the areas of electrification, automation and digitalization. One of the world’s largest producers of energy-efficient, resource-saving technologies, Siemens is a leading supplier of efficient power generation and power transmission solutions and a pioneer in infrastructure solutions as well as automation, drive and software solutions for industry. The company is also a leading provider of medical imaging equipment – such as computed tomography and magnetic resonance imaging systems – and a leader in laboratory diagnostics as well as clinical IT. In fiscal 2016, which ended on September 30, 2016, Siemens generated revenue of €79.6 billion and net income of €5.6 billion. At the end of September 2016, the company had around 351,000 employees worldwide.

Further information is available on the Internet at

Automation review | B2B platform for automation industry
Reset Password